I am in the process of completing my retrofit of AXYZ Millenium CNC. Thank you to some of the members here that had helped.
I have this AXYZ - Smouse Surface Tooltip Sensor and would like to wired this up to ESS Smoothstepper with C11G, but not sure about power/ground or data wires on this device.
Any one have the same unit or have experience with this. Thanks
Results 1 to 1 of 1
-
02-24-2023, 11:07 PM #1
Registered
- Join Date
- Jun 2016
- Posts
- 9
Any members here have this AXYZ - Smouse Surface Tooltip Sensor?
Reply With QuoteSimilar Threads
-
Broken proximity sensor - what sensor guards have you made?
By dgage in forum Avid CNCReplies: 3Last Post: 06-26-2018, 06:56 PM -
Linear rails bolted to steel members with hard epoxy surface in between.
By hoggie in forum Epoxy GraniteReplies: 5Last Post: 09-15-2016, 05:57 AM -
Tooltip radius compensation help!
By Predator in forum G-Code ProgramingReplies: 26Last Post: 09-07-2012, 03:46 AM -
Why is toolpath not shown at tooltip?
By samch in forum MadCAMReplies: 2Last Post: 11-20-2010, 11:43 AM
Tags for this Thread
Posting Permissions
