Hello guys.
I have a Duet2 wifi board but I can't understand how to wire the motors 4pins.
The Duet2 manual says :
"On Duet 2 WiFi these are labelled '2B 2A 1A 1B' on the back of the board, and on the wiring diagram. The '1' and '2' refer to the coil or phase, the 'A' and 'B' refer to the positive and negative."
https://d17kynu4zpq5hy.cloudfront.ne...sxMC5tRgt.huge
My stepper motors label says :
BlackA+
GreenA-
RedB+
BlueB-
Do you understand ?
Thank you.