Hi guys, this is my first "larger" CNC project.
First, i am sorry for my bad english...but mostly i dont care
Initial plan was to buy Shapeoko, but when i have seen prices i figured thats too much so i decided to make my own design.
i dont expect much, just to cut some boards and have some fun
So i opened couple of Croatian beers and few hours later i mocked up this:
1
So basically i sourced parts on ebay and lets start...
Today was day one of physical build, so i started with simple motor carriages:
-you will notice i am missing bolts and holes etc...i like to live a dangerous life
2
3
and the real deal...
i just cleaned parts a bit with grinder, removed microjoints from laser cutting and welded parts together:

IMG-20210209-174435
IMG-20210209-180006
IMG-20210209-180823
then i fast grinded welds so noone can see how awful my welds are
IMG-20210209-183410

i think next on my list is Z carriage. i am not shure but we will see. Stay tuned.