584,849 active members*
3,889 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jan 2015
    Posts
    3

    Reading CC values from iTNC 530

    Hey!

    How to read the active CC plane and its values from the tnc? I reckon this should be possible with the FN18: SYS READ, but i can't find the ID for it from manual or anywhere.

    Any help?

  2. #2
    Join Date
    Feb 2021
    Posts
    2

    Re: Reading CC values from iTNC 530

    71 FN 18: SYSREAD Q1110 = ID503 NR54 IDX1 ;X
    72 FN 18: SYSREAD Q1111 = ID503 NR54 IDX2 ;Y
    73 FN 18: SYSREAD Q1112 = ID503 NR54 IDX3 ;Z

  3. #3
    Join Date
    Jan 2015
    Posts
    3

    Re: Reading CC values from iTNC 530

    Quote Originally Posted by spadarz View Post
    71 FN 18: SYSREAD Q1110 = ID503 NR54 IDX1 ;X
    72 FN 18: SYSREAD Q1111 = ID503 NR54 IDX2 ;Y
    73 FN 18: SYSREAD Q1112 = ID503 NR54 IDX3 ;Z
    Didn't work. Result was +999999999 for every index when CC X+100 Y+50 was set

Similar Threads

  1. Need PP iTNC 530 for MC X8
    By ravenswing in forum Post Processors for MC
    Replies: 0
    Last Post: 12-03-2020, 11:17 AM
  2. Reading load meter values
    By MRPM in forum Mori Seiki lathes
    Replies: 0
    Last Post: 06-16-2017, 04:53 PM
  3. Reading a DSTV file and the values for each. Please help.
    By support.dept in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 01-24-2014, 07:21 AM
  4. Reading offset values
    By crazycnc in forum Fanuc
    Replies: 7
    Last Post: 01-27-2011, 09:49 PM
  5. Reading workingoffset values
    By rui.costa in forum G-Code Programing
    Replies: 4
    Last Post: 12-20-2007, 09:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •