I'm a little lost at this point I don't know what file format my backup is, and the txt file is not loading to machine, I also have a friend with LADDER 3 can open either file, says invalid memory card file. He can't seem to figure it out but he's electrical guy not CNC. This machine I have has symbolic FAPT and when I was doing some research I came across FAPT ladder software wondering if I need this?
Results 21 to 22 of 22
-
02-25-2021, 09:47 PM #21
Member
- Join Date
- Feb 2018
- Posts
- 14
Re: Puma 200 Fanuc 18-T part counter M code
-
02-25-2021, 09:53 PM #22
Member
- Join Date
- Feb 2018
- Posts
- 14
Re: Puma 200 Fanuc 18-T part counter M code
I forgot to mention that my machine has no USB or memory card slot, it only communicates with RS-232, I hooked up our laptop directly to the machine in order to get the LADDER backup I provided in this thread.
Reply With QuoteSimilar Threads
-
Part counter through programing variable Fanuc 18i T
By kruener1 in forum FanucReplies: 5Last Post: 09-28-2017, 09:47 PM -
PART COUNTER FANUC OT CONTROL
By Amboy in forum FanucReplies: 8Last Post: 02-11-2015, 01:07 PM -
chiron with fanuc 21Mb - problem with the part counter and time counter
By hartan in forum FanucReplies: 1Last Post: 06-11-2014, 02:53 AM -
Part counter G code
By Dzuari in forum Mazak, Mitsubishi, MazatrolReplies: 4Last Post: 04-27-2012, 01:16 AM -
Changing Fanuc part counter increment?
By gearsoup in forum FanucReplies: 4Last Post: 06-23-2007, 01:50 PM
Tags for this Thread
Posting Permissions
