584,857 active members*
4,726 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma open door message at startup
Results 1 to 6 of 6
  1. #1
    Join Date
    Apr 2008
    Posts
    49

    Okuma open door message at startup

    On start up, the screen displays (please open door). It does not unlock the door. This is a newly acquired 2007 L370 with P200L control. It was setup with auto door and a robot. Robot is now out of the picture.

  2. #2
    Join Date
    Apr 2009
    Posts
    1262

    Re: Okuma open door message at startup

    Press the door open button upon startup. It needs to verify that the door lock is “still there” after boot up. Once verification takes place the alarm will go away. You will need to be in manual mode for it to work.

    Best regards,

  3. #3
    Join Date
    Apr 2008
    Posts
    49

    Re: Okuma open door message at startup

    I needed to be in manual mode. Thanks OkumaWiz.

  4. #4
    Join Date
    Apr 2009
    Posts
    1262

    Re: Okuma open door message at startup

    :wave:
    Experience is what you get just after you needed it.

  5. #5
    Join Date
    May 2022
    Posts
    3

    Re: Okuma open door message at startup

    I was wondering if there is a way a west ham locksmith could fix that. Maybe there is a mechanical issue that needs to be fixed by somebody who knows the mechanics of a lock

  6. #6
    Join Date
    May 2022
    Posts
    1

    Re: Okuma open door message at startup

    Quote Originally Posted by JaymeL View Post
    I was wondering if there is a way a west ham locksmith could fix that. Maybe there is a mechanical issue that needs to be fixed by somebody who knows the mechanics of a lock
    I think its much more about robotics, and if a locksmith is not an Engineer,he does nothing to do about it

Similar Threads

  1. Replies: 1
    Last Post: 01-07-2021, 09:05 AM
  2. Haas OM2A Door Open Door Hold
    By kaymteo in forum Haas Mills
    Replies: 1
    Last Post: 07-29-2020, 03:28 PM
  3. Replies: 16
    Last Post: 06-12-2020, 03:18 AM
  4. Error Message on startup
    By gunmaker in forum Milltronics
    Replies: 2
    Last Post: 01-03-2019, 05:48 PM
  5. Replies: 8
    Last Post: 04-04-2015, 02:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •