Hi,
I have a china cnc with a 4 Axis RZNC 32 LED DSP controller.
The machine works years without errors.
But from today i cant turn on the spindel.
Need advice where to look for the error.
Thanks.
Hi,
I have a china cnc with a 4 Axis RZNC 32 LED DSP controller.
The machine works years without errors.
But from today i cant turn on the spindel.
Need advice where to look for the error.
Thanks.
spindle dont work
1 spindle itself
2 VFD inveter
3 cable connection check
Check all the connections for tighness.
Is the relay pulling in? If not, is the relay getting a voltage to energise?