584,808 active members*
5,216 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR
Results 1 to 14 of 14
  1. #1
    Join Date
    Nov 2008
    Posts
    37

    FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    Hi, we need you help to solve my problem on Fanuc Oi-D alarm "SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR" suddenly appear after about one hours running. Attached are the picture of alarm

  2. #2
    Join Date
    Aug 2011
    Posts
    418

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    I think , real alarm/error is
    PC050 IOLINK ER1 CH1:GR00:03
    "Imagination is more important than knowledge."

  3. #3
    Join Date
    Nov 2008
    Posts
    37
    Quote Originally Posted by kurmay View Post
    I think , real alarm/error is
    PC050 IOLINK ER1 CH1:GR00:03
    What does it mean?

  4. #4
    Join Date
    Aug 2011
    Posts
    418

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    I don't know but it seems PLC error.
    "Imagination is more important than knowledge."

  5. #5
    Join Date
    Dec 2009
    Posts
    947

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    one of the I/O device is offline,maybe a fuse blown on the device,possible you have a short somewhere on the wires

  6. #6
    Join Date
    Oct 2009
    Posts
    297

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    Quote Originally Posted by mluqman View Post
    Hi, we need you help to solve my problem on Fanuc Oi-D alarm "SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR" suddenly appear after about one hours running. Attached are the picture of alarm
    Check the position of the axes when the alarm appears. It could be an intermittent short circuit . This is why the alarm PC050 IOLINK ER1 CH1:GR00:03 appears. If it happens even when the machine is not running, probably a bad PSU in the PLC rack.

    regards
    AlexFanuc

  7. #7
    Join Date
    Nov 2008
    Posts
    37

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    Quote Originally Posted by alexfanuc View Post
    Check the position of the axes when the alarm appears. It could be an intermittent short circuit . This is why the alarm PC050 IOLINK ER1 CH1:GR00:03 appears. If it happens even when the machine is not running, probably a bad PSU in the PLC rack.

    regards
    AlexFanuc
    I shutdown the machine and ON again after that the alarm PC050 IOLINK ER1 CH1:GR00:03 not appear anymore (like normal booting) but alarm display in the following

    OT alarm
    Turret alarm
    Emergency alarm

    I checked X input on the io status all the bits 0 that means the io not working.



    whe

  8. #8
    Join Date
    Dec 2009
    Posts
    947

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    look on the PMC Maintenace screen, on the I/O LINK screen ad show us what you have there.
    Click image for larger version. 

Name:	Untitled.jpg 
Views:	12 
Size:	22.1 KB 
ID:	458934

  9. #9
    Join Date
    Nov 2008
    Posts
    37
    Quote Originally Posted by zavateandu View Post
    look on the PMC Maintenace screen, on the I/O LINK screen ad show us what you have there.
    Click image for larger version. 

Name:	Untitled.jpg 
Views:	12 
Size:	22.1 KB 
ID:	458934
    Case close, the io at control panel defective
    thank you to all of you

  10. #10
    Join Date
    Mar 2021
    Posts
    12

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    输入输出单元的线短路了

  11. #11
    Join Date
    Apr 2021
    Posts
    2

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    Quote Originally Posted by mluqman View Post
    Case close, the io at control panel defective
    thank you to all of you
    YOU CAN SHARE US MORE INFORMATION ON THE REPAIR OF THE FAILURE.

  12. #12
    Join Date
    Apr 2021
    Posts
    2

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    HELLO COULD YOU HELP ME, I HAVE THIS INTERMITTENT ALARM IN MY MACHINE ..... FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR .... WE RESET IT AND RESET BUT STILL WE CANNOT FIND ANY SHORT OR FUSE DAMAGED

  13. #13

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    FANUC SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR results

    - - - Updated - - -

    FANUC SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR results

  14. #14
    Join Date
    Mar 2022
    Posts
    1

    Re: FANUC Oi-D SYS_ALM197 EMBEDDED SOFTWARE SYSTEM ERROR

    Hi!
    How could you find the failure?
    I had a similar mistake in a fanuc controller, I check I/O link controller but nothing seems weird

Similar Threads

  1. Fanuc system 3T F error
    By zone7 in forum Fanuc
    Replies: 9
    Last Post: 06-23-2020, 10:49 PM
  2. Replies: 5
    Last Post: 04-20-2019, 02:31 PM
  3. Fanuc 10 System Error E
    By nordlichtFanuc in forum Fanuc
    Replies: 15
    Last Post: 11-10-2018, 07:59 PM
  4. Doosan Lynx 300 System Software Error
    By ss101504 in forum Daewoo/Doosan
    Replies: 3
    Last Post: 02-04-2017, 01:52 AM
  5. Replies: 2
    Last Post: 06-08-2007, 05:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •