Anyone know of an after market memory upgrade for the Mazatrol M-2. Need to do some 3D work and don't have near enough memory. Or does anyone know how to drip feed an M-2. Thanks, Joe
Thread: M-2 Memory
Results 1 to 3 of 3
-
08-07-2007, 06:51 PM #1
Registered
- Join Date
- Dec 2006
- Posts
- 95
M-2 Memory
-
08-30-2007, 10:24 PM #2
Registered
- Join Date
- Jun 2007
- Posts
- 43
memory
Be careful, it might not just be a memory upgrade, you might also require the 3D option Roms
-
09-05-2007, 07:13 AM #3
Registered
- Join Date
- May 2003
- Posts
- 84
Hey Newguy81,
Forget about an upgrade on an old M2, the cost is more than the machine is worth. I have an old AJV25/404 that I regularly drip feed long programs into. It works fine once you have it set up. I use an older free copy of NC Link from One CNC. I know they don't give it out anymore, but I can email you a copy. It was free remember, so no copywright problems. There are a few things to do so that it works. Send me an email at [email protected] and I can help you with it. It's not difficult, and it works well.
Fish
Reply With QuoteSimilar Threads
-
need more memory
By rob2424 in forum DNC Problems and SolutionsReplies: 1Last Post: 01-28-2008, 12:04 PM -
Out of Memory errors
By trevj1 in forum MilltronicsReplies: 18Last Post: 08-10-2007, 02:00 AM -
88 Memory ?
By Bear in forum FadalReplies: 2Last Post: 09-01-2006, 12:26 PM -
EMC memory error
By tomekbrzozowski in forum LinuxCNC (formerly EMC2)Replies: 1Last Post: 07-03-2006, 09:04 PM -
Bubble memory
By Darkos in forum FanucReplies: 3Last Post: 06-06-2006, 09:29 PM
Posting Permissions
