https://www.youtube.com/watch?v=ZbMbQ_RFpho&t=63s
This is a youtube video shedding a little light for when buying a fiber laser the first time, or second, or third LOL.
https://www.youtube.com/watch?v=ZbMbQ_RFpho&t=63s
This is a youtube video shedding a little light for when buying a fiber laser the first time, or second, or third LOL.
I actually watched the whole video... The dude has a talent for a politician He spoke for 15 minutes without saying anything important or useful.
In the first half of the video, he shows a cheap Chinese machine without providing any information beyond what a briefly trained Chinese salesman would tell you in 1 minute.
The second half is about a machine he bought locally and his focus is on the sheet-metal cabinet and some simple fixtures
It could have been a useful video if he compared both machines on a component level (tech. spec) and went over the differences in the functionality of the software.
Most of the so-called "US-made machines" I've seen are actually made with typical Chinese components and the controllers (software) they use are not necessarily better than EZCAD.