I have a Partner 1 with the plunger style 6 pocket tool changer. I lost the cmos battery a while ago and sent the control to get repaired but unfortunately I didn't have a backup of the parameters. I have everything working now except for M19 spindle orient for the tool change macro. All the other codes seem to do what they are supposed to but M19 just rotates the spindle at the jog speed but never activates the cylinder that locks the spindle. Even if I do the codes separately they don't work together.
Anyhow, I'm hoping someone here might have the parameter files for this style too changer they could send me?

Thanks!

Mike