537,846 active members*
4,157 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Sep 2017
    Posts
    18

    Plasma Table Manufacturer Vanished, what now?

    The manufacturer of the plasma table we use vanished, website gone, phones unanswered, BBB complaints unresolved and flagged with a warning. Is there a.. generic repair tech service? We apparently have a problem with the control board and no idea what to do about it.

  2. #2
    Gold Member
    Join Date
    Apr 2004
    Posts
    5252

    Re: Plasma Table Manufacturer Vanished, what now?

    Did it have a brand name? Is there any identification on the control board? They might have used a board they didn't make themselves, in which case you'd have an easier task of repair or replacement.
    Andrew Werby
    Website

  3. #3
    Registered
    Join Date
    Sep 2017
    Posts
    18

    Re: Plasma Table Manufacturer Vanished, what now?

    EZ Cut. I'll have to go take it apart and check the controller, but I think it was also labeled with their brand name. If it's theirs, I'm worried that my chances of another manufacturer being willing to support us is... not great. I'm also not sure how difficult it is to switch from their software to something else. I've been ignoring bugs up until now in the vague hope that they'd let me get a patch someday, but that's apparently not going to happen. I could never get their techs to share a technical manual or a wiring diagram.

  4. #4
    Member
    Join Date
    Jun 2019
    Posts
    8

    Re: Plasma Table Manufacturer Vanished, what now?

    If you are U.k based try Techserv in Huddersfield, they make their own machines and software and retrofit their control to 3rd party machines, it is very easy software to use, they have a facebook page if you want to check them out.

  5. #5
    Registered
    Join Date
    Sep 2017
    Posts
    18

    Re: Plasma Table Manufacturer Vanished, what now?

    MidWest USA here

Similar Threads

  1. Mini CNC Plasma Table Using the Eastwood plasma table for the base.
    By Roadstercycle in forum General CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 1
    Last Post: 03-15-2019, 10:11 PM
  2. Replies: 0
    Last Post: 02-12-2019, 09:18 PM
  3. Help ID Plasma CNC Manufacturer?
    By jimbar99 in forum General Waterjet
    Replies: 5
    Last Post: 01-16-2016, 11:00 AM
  4. Problems with Brand New Table from a company who has all but vanished
    By HPIcustoms in forum General CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 11
    Last Post: 12-05-2014, 06:50 PM
  5. Plasma Manufacturer
    By Alex S.A in forum Polls
    Replies: 0
    Last Post: 11-04-2007, 12:05 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •