I got more and more questions on PlanetCNC after mentioning that I was using it in one of my videos so I decided to start a little series on the Topic.
As my main audience is German and I'm much more comfortable talking in my native language the Videos are in German as well. But maybe they are of interest for a few users here as well.
I started with a general demonstration of my workflow with PlanetCNC:
https://youtu.be/K4y5MsBp2kQ
The second video covers the Hardware side:
https://youtu.be/eJyZ-4gaKBc
A third video with a detailed look at the software side should be ready by the end of this week. And maybe I add a few more on specific topics like setup, tool length measurement and Probing.
Those videos should not be seen as advertisement for PlanetCNC but as a information source. It seems there is not much information out there on the Topic and I would like to help people to get a better basis for a informed decision when choosing a controller.