hello!
i'm thinking about buying a haas VF1 or a VF2 that i'll be placing initially in a garage 3 meters in height (about 118 inches). Are they the same height? and can they fit in that location?
Thanks in advance.
Results 1 to 2 of 2
-
03-01-2021, 10:55 PM #1
- Join Date
- Feb 2021
- Posts
- 9
Concerns about f Haas VF1/VF2 height.
-
05-08-2021, 03:38 AM #2
Registered
- Join Date
- Jul 2010
- Posts
- 172
Re: Concerns about f Haas VF1/VF2 height.
Both the VF1 and the VF have the same exterior dimensions.
Total operating height required is 110" but I would recommend a little more than that.
Shipping height is 101" though.
After squeezing it through an overhead door on a forklift you'll have very little room to maneuver with....
TimothyDyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
BobCad 16, 20, 24 and now V25
Reply With QuoteSimilar Threads
-
Help wiring Tool Height/ Z axis height base into C10 BOB
By SpecialEd in forum Tormach Personal CNC MillReplies: 2Last Post: 11-21-2016, 02:13 AM -
Haas vfo z axis height problem
By s00073055 in forum Haas MillsReplies: 4Last Post: 03-11-2016, 08:55 PM -
Capacitor concerns
By MSGMachine in forum CNC Machine Related ElectronicsReplies: 4Last Post: 11-17-2009, 05:01 AM -
TCE exposure concerns
By g0rd057 in forum Safety ZoneReplies: 3Last Post: 03-31-2008, 04:13 AM -
VMC 25 M50 concerns
By Fred MPE in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 07-11-2006, 08:09 AM
Tags for this Thread
Posting Permissions
