543,875 active members*
2,143 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Concerns about f Haas VF1/VF2 height.
Results 1 to 2 of 2
  1. #1

    Join Date
    Feb 2021
    Posts
    9

    Concerns about f Haas VF1/VF2 height.

    hello!
    i'm thinking about buying a haas VF1 or a VF2 that i'll be placing initially in a garage 3 meters in height (about 118 inches). Are they the same height? and can they fit in that location?
    Thanks in advance.

  2. #2
    Registered
    Join Date
    Jul 2010
    Posts
    166

    Re: Concerns about f Haas VF1/VF2 height.

    Both the VF1 and the VF have the same exterior dimensions.
    Total operating height required is 110" but I would recommend a little more than that.
    Shipping height is 101" though.
    After squeezing it through an overhead door on a forklift you'll have very little room to maneuver with....

    Timothy
    Dyna Mechtronics DM4400, Bridgeport Discovery 300, HAAS VF-0E, HAAS VF-2D
    BobCad 16, 20, 24 and now V25

Similar Threads

  1. Help wiring Tool Height/ Z axis height base into C10 BOB
    By SpecialEd in forum Tormach Personal CNC Mill
    Replies: 2
    Last Post: 11-21-2016, 02:13 AM
  2. Haas vfo z axis height problem
    By s00073055 in forum Haas Mills
    Replies: 4
    Last Post: 03-11-2016, 08:55 PM
  3. Capacitor concerns
    By MSGMachine in forum General CNC Machine Related Electronics
    Replies: 4
    Last Post: 11-17-2009, 05:01 AM
  4. TCE exposure concerns
    By g0rd057 in forum Safety Zone
    Replies: 3
    Last Post: 03-31-2008, 04:13 AM
  5. VMC 25 M50 concerns
    By Fred MPE in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 07-11-2006, 08:09 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •