problem is that I changed the Cable of the turret by cable X2 and I noticed that the Cable of the turret is working but when I plug it into its TI connector there are three axes which appear on the console I think there is a card that is shorted
Results 1 to 1 of 1
-
03-02-2021, 12:39 AM #1
Member
- Join Date
- Jul 2019
- Posts
- 53
Meldas 600 Alarm y03 amp unequipped TI
Reply With QuoteSimilar Threads
-
Meldas 600 alarme y03 amp unequipped
By Drisscn in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 02-18-2024, 07:46 PM -
Meldas 500 Alarm S01 Servo alarm 003A-Z
By CBMach in forum Mazak, Mitsubishi, MazatrolReplies: 2Last Post: 12-04-2019, 04:33 AM -
Meldas 500 Alarm S01 Servo alarm 003A-Z
By CBMach in forum Mitsubishi controlsReplies: 1Last Post: 12-03-2019, 03:17 PM -
Puma 8S Y03 Amp Unequipped Spindle Stop Signal
By runninwideopen in forum Daewoo/DoosanReplies: 7Last Post: 01-16-2019, 12:24 AM -
Alarm 511 Meldas Mo
By LnL in forum DNC Problems and SolutionsReplies: 0Last Post: 07-11-2007, 04:02 PM
Tags for this Thread
Posting Permissions
