584,808 active members*
5,158 visitors online*
Register for free
Login
Results 1 to 8 of 8
  1. #1
    Join Date
    Mar 2021
    Posts
    4

    Need 20 small steel blocks with 2 counterbore holes each

    Please quote price and availability for the CNC fabrication of 20 pieces of the block with two counterbore holes shown in the attached files. The partfiles.zip contains four part files:
    MountingBlockForPlates-From1in-NoThreads.ipt
    MountingBlockForPlates-NormalDim-NoThreads.stp
    MountingBlockForPlates-NormalDim-NoThreads.ipt
    MountingBlockForPlates-From1in-NoThreads.stp

    The "MountingBlockForPlates-NormalDim-NoThreads" is the preferred version, but I included a 1x1xA version in case that will be significantly cheaper
    to make

    The .ipt and .stp alternates are for convenience, and should be equivalent.
    I am looking for +/- 0.005" tolerance or better, but the only real critical dimension is the hole spacing
    A36 steel
    Finish: nothing special

    Dave

  2. #2
    Join Date
    Aug 2010
    Posts
    8
    Hello I'm interested. [email protected].

  3. #3
    Join Date
    Feb 2006
    Posts
    196

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Dave,
    What is your email to send the quote?
    Doug Pryor
    David Wolfe Design, Inc.
    Akron, OH
    www.davidwolfedesign.com
    [email protected]

  4. #4
    Join Date
    Mar 2021
    Posts
    4

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by dpryor View Post
    Dave,
    What is your email to send the quote?
    Reply to the note I sent to your yahoo email address

  5. #5
    Join Date
    Aug 2012
    Posts
    35

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Good morning Dave,

    Please send me your email to: [email protected] and I will send you a quote back this afternoon.

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU

  6. #6
    Join Date
    Mar 2021
    Posts
    4

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by XYZ-ABC View Post
    Good morning Dave,

    Please send me your email to: [email protected] and I will send you a quote back this afternoon.

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU
    The email bounced with the error below. It looks to be yahoo related. I have seen problems emailing yahoo addresses in the past.

    <[email protected]>: host
    mx-biz.mail.am0.yahoodns.net[67.195.204.83] said: 421 4.7.0 [TSS04]
    Messages from 69.89.20.237 temporarily deferred due to unexpected volume or
    user complaints - 4.16.55.1; see
    https://postmaster.verizonmedia.com/error-codes (in reply to MAIL FROM
    command)

  7. #7
    Join Date
    Aug 2012
    Posts
    35

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Dave,

    Please try and send it to: [email protected]

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU

  8. #8
    Join Date
    Mar 2021
    Posts
    4

    Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by dpryor View Post
    Dave,
    What is your email to send the quote?
    Sorry, I confused you with someone else in my reply about the yahoo email address.
    This one is gone now. I didn't have much time to collect quotes this time. I'll try to get the RFQ out at least a week ahead of the deadline next time.
    Dave

Similar Threads

  1. Drilled Holes Not Centered w/ Counterbore
    By tkalxx in forum Benchtop Machines
    Replies: 12
    Last Post: 11-30-2020, 05:03 PM
  2. S/F - Small holes in mild steel.
    By Wtz-44 in forum Material Machining Solutions
    Replies: 2
    Last Post: 06-25-2020, 04:30 PM
  3. Elongated Counterbore holes
    By cncnewbie68 in forum Autodesk
    Replies: 0
    Last Post: 11-22-2012, 01:50 AM
  4. Fast way to create bearing seats (holes w/ counterbore)
    By cjjonesarmory in forum Mass finishing equipment/media/strategies
    Replies: 2
    Last Post: 11-18-2010, 03:54 PM
  5. Drilling small holes in Die steel
    By drk in forum MetalWork Discussion
    Replies: 1
    Last Post: 08-13-2008, 07:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •