548,546 active members*
356 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > colchester cnc 2000l elctrical manual need
Results 1 to 3 of 3
  1. #1

    Join Date
    Jul 2020
    Posts
    3

    colchester cnc 2000l elctrical manual need

    i have cnc 2000l, lubrication low indicator on but missing the lubrication flot switch input wire, i have not electrical manual ,please help me, which input lub level low ,wire no. and input no.

  2. #2

    Join Date
    Jul 2020
    Posts
    3

    Re: colchester cnc 2000l elctrical manual need

    Sir pls

  3. #3
    Registered
    Join Date
    Nov 2016
    Posts
    8

    Re: colchester cnc 2000l elctrical manual need

    Hi surj i have same machine with similar problem.
    The lube lite comes off a float magnetic switch situated in the top box adjacent spindle. Looks like after a while the magnet just falls off the float so most people just permanently join the wires to continuously send the full signal.
    My lube lite is on and the wires are present and joined together however lube lite is still on so spindle wont run.
    There maybe a perameter to isloate it but finding someone to help is tricky.
    My guess is yours has been shorted in the control box and you have same problem.
    I did connect and disconnect wires and it worked one time and spindle started up.
    My guess is a sticking relay in box

    Richard

Similar Threads

  1. Colchester 2000L
    By bertcnc in forum Colchester Tornado lathes
    Replies: 16
    Last Post: 06-25-2020, 07:40 AM
  2. Colchester 2000L CNC
    By Rathousekid in forum Colchester Tornado lathes
    Replies: 2
    Last Post: 05-08-2018, 07:47 AM
  3. colchester cnc 2000l parameter
    By kabdelwahid in forum Colchester Tornado lathes
    Replies: 5
    Last Post: 08-05-2016, 04:59 PM
  4. Colchester 2000L APC 310 and 320 Alarm
    By rjhzxc in forum Colchester Tornado lathes
    Replies: 2
    Last Post: 04-23-2014, 02:38 PM
  5. Need Parameters For Colchester 2000L CNC
    By Hakam in forum Colchester Tornado lathes
    Replies: 1
    Last Post: 10-27-2012, 02:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •