585,748 active members*
3,673 visitors online*
Register for free
Login

Thread: Mori Seiki LL8 With MSC-501

Results 1 to 2 of 2
  1. 03-12-2021, 11:45 PM #1
    Cregg9
    Cregg9 is offline Member
    Join Date
    Mar 2021
    Posts
    1

    Mori Seiki LL8 With MSC-501

    Please help,
    I was tasked with the job to replace the X axis ball screw on a Mori Seiki LL8 after an incident. I was informed that nothing special was required prior to disassembling prior removal of motor and encoder. The screw has been replaced and reassembled. I have now powered up and driven to the ref position with no procedure for saving this as ref position.
    Reply With Quote Reply With Quote
  2. 03-13-2021, 06:47 AM #2
    TomCh
    TomCh is offline
    Join Date
    Feb 2021
    Posts
    4

    Re: Mori Seiki LL8 With MSC-501

    Parameter 1815. Set APZ for x axis from 1 to 0 and back to 1. After restart controler. Then you saved actual pos as zero pos.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules