When surfacing my spoil board I noticed ripples that can barely be felt by hand. It does not look like the machine is adjustable, so this has me worried. When I take a the spoil board bit and spin it by hand close to the surface of the factory mdf, it leaves a 3/4 circle mark. Clearly the spindle is not perfectly square to the machine but I'm not sure what is acceptable or not.
What can I do about this? Is there some way to tram a camaster stinger 1?
Thread: Tramming a new stinger 1
Results 1 to 2 of 2
-
03-13-2021, 02:46 AM #1
- Join Date
- Apr 2020
- Posts
- 22
Tramming a new stinger 1
-
04-02-2021, 10:00 PM #2
- Join Date
- Apr 2020
- Posts
- 22
Re: Tramming a new stinger 1
Just as a follow up, the machine was fine when measured.
Originally Posted by KT88saturate
Reply With QuoteSimilar Threads
-
Camaster Stinger III for sale
By michaeleecobra in forum For Sale OnlyReplies: 7Last Post: 09-07-2020, 04:31 AM -
ShopSabre 23 or Camaster Stinger 1 ?
By Tim Sewald in forum Want To Buy...Need help!Replies: 11Last Post: 02-20-2018, 03:50 PM -
Stinger II question.
By JasC in forum CamasterReplies: 1Last Post: 01-16-2011, 10:58 PM -
CAMaster Stinger
By Cut to the Bone in forum CamasterReplies: 2Last Post: 11-18-2010, 12:24 AM
Tags for this Thread
Posting Permissions
