I`m new to TNG so be kind with me.
I have a problem with displayed toolpath in 4 axis.
When work coordinate is the same as machine display is ok.
Attachment 460464
When work coordinate is offset from machine coordinate it distort the toolpath like this:
Attachment 460466
In the old softare with offset didn`t had this problem:
Attachment 460468
The toolpath work without problems only it is displayed incorrect.
If disable rotary axis in display 3d toolpath display is correct and not distorted, but not 3D.
I hope I explained well the problem, if not I`m here for any clarifications.