584,837 active members*
5,332 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Vectric > Desktop ver 10.5
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2020
    Posts
    10

    Desktop ver 10.5

    2nd clearing pass not aligning with the first pass...Its not the machine! Please Help!

  2. #2

    Re: Desktop ver 10.5

    2nd clearing pass not aligning with the first pass...Its not the machine! Please Help!
    Have you verified that by looking at the G code and finding the misalignment there?

    If it looks correct in the preview then it isn't a code issue. Look elsewhere.

  3. #3
    Join Date
    Dec 2018
    Posts
    16

    Re: Desktop ver 10.5

    Quote Originally Posted by kasari62 View Post
    2nd clearing pass not aligning with the first pass...Its not the machine! Please Help!
    I recently had a similar problem on multi-pass clearing paths in which had errant Z-axis step-downs.

    To make a very long story short - the issue was resolved by a firmware update. Along the way, I used a 3rd party simulator to rule out g-code issues, aligned the machine, and repeatedly ran test toolpath cases using two different jobs to rule out speed/feed as the source of the mischief.

Similar Threads

  1. Replies: 0
    Last Post: 06-06-2018, 01:50 PM
  2. KL-6090 Desktop Cnc Router desktop,(24 x 36 x 6 inch)
    By automationtechinc in forum For Sale Only
    Replies: 2
    Last Post: 09-18-2015, 09:05 PM
  3. KL-6090 Desktop Cnc Router desktop,(24 x 36 x 6 inch)
    By automationtechinc in forum News Announcements
    Replies: 0
    Last Post: 04-28-2015, 11:23 AM
  4. X3 Desktop CNC
    By bonmotwang in forum DIY CNC Router Table Machines
    Replies: 28
    Last Post: 02-05-2014, 02:42 PM
  5. Desktop pc instead of plc
    By axis_control in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 11
    Last Post: 02-06-2008, 02:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •