I just bought a matsuura MC760 V2 with yasnac mx1 control from the year 1981 I have managed to start the axles and the hydraulic group and also the atc works but I can not start the spindle neither manual nor in mdi I have read in several threads that You have to put the three axes in home so that the machine lets you use the spindle but there is no way to put it in home position the axis continues and does not stop until the soft alarm stops it, I am checking the parameters that the machine brings and I have realized that from parameter 6030 to 6049 it is empty without numbers, I give the button to register parameter and it does not leave me because since there are no numbers or zeros or anything, if someone knows the possible cause please I would appreciate it a lot aid.