Re: Troubleshooting - Cycle Start - problem
Watch out on a bigger hair, you might pop your eyes
OK, you have a machine and you are using Mach3, AND have some problems.
I also have a machine and am using Mach3 and have NO problems.
You know, I have a crystal ball, but it has not arrived from polishing (yet) so I (we) can't help you 'cause I (we) can't "see" your hardware: parallel port or external motion controller (make and model), and other relevant information that would help me (us) to help you.
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.