584,874 active members*
5,504 visitors online*
Register for free
Login

Thread: Need a board

Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2013
    Posts
    5

    Need a board

    Hey guys, I'm looking for a fadal 1570 boars for hooking up renishaw stuff, does anyone here have one for sale or know of anyone that has one?

    I'm trying to connect a Renishaw OMI and a TS27R, I also have 2 MI12 boxes, 1 MI8-4, 1 MI-8 and a couple of 120v to 24vdc converters, been trying to figure our how to hook them up but I figured the 1570 board would be less of a headache.

    Thanx guys and please let me know ????

  2. #2
    Join Date
    Oct 2014
    Posts
    38

    Re: Need a board

    I was in the same boat as you are, looked everywhere for one but I could not locate one. Over a year ago I posted in the Fadal Facebook group and guy in England ask me if I was still interested and bought it from him, I got lucky.
    If I was you I start installing it with the MI12 and MI8-4 and get it done chances of finding a 1570 are slim.
    Check this page
    https://www.doovsprojects.com/projects/adding-a-renishaw-probe-system-to-my-fadal-vmc that fellow did a wonderful job there is schematics and clear instructions.

  3. #3
    Quote Originally Posted by MANIAK RACING View Post
    Hey guys, I'm looking for a fadal 1570 boars for hooking up renishaw stuff, does anyone here have one for sale or know of anyone that has one?

    I'm trying to connect a Renishaw OMI and a TS27R, I also have 2 MI12 boxes, 1 MI8-4, 1 MI-8 and a couple of 120v to 24vdc converters, been trying to figure our how to hook them up but I figured the 1570 board would be less of a headache.

    Thanx guys and please let me know ????
    Hi, you don’t actually need the interface board, all the board is, is a 24v power supply and 2 relays. Watch the Atman video, he explains how you can go about interfacing everything, if you still need help definitely let me know. I installed my Renishaw probing system without it. Excuse the messy wiring in the photo, this is from before I tidied everything up.

Similar Threads

  1. G0704 stock spindle control board to mach 3 via C32 board.
    By ballistic42 in forum Benchtop Machines
    Replies: 13
    Last Post: 09-22-2016, 02:47 AM
  2. Replies: 0
    Last Post: 11-26-2015, 10:34 PM
  3. Replacing BMU board in AMADA PEGA 357 (Instaling TULIP Fanram Board)
    By Spanish in forum Maintenance DIY Discussion
    Replies: 0
    Last Post: 11-21-2015, 02:58 PM
  4. Replies: 0
    Last Post: 11-30-2014, 05:16 AM
  5. Replies: 1
    Last Post: 06-01-2010, 05:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •