Originally Posted by
shanemshaffer
I am looking to build a 6ft by 20ft CNC table to use with a laser to cut single layers of fabric. Trying to do this as a DIY project. I am completely new to this so any help would be appreciated or guidance on where to find the right information. This laser would need to be be accurate to 1mm or less if possible and speed is not super important as anything will be faster then cutting by hand. I have no clue as to what software I should use, the right motors to use, or guide rails for the laser to run on. Thank you again for any help.
Sorry, man.
If you are completely new to big lasers, you shouldn`t do this.
It is really easy to lose sight.
CNC lasers, constructions, service