585,712 active members*
3,935 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > CNC Machine Related Electronics > UPGRADE OF CNC SYSTEM TOSNUC TO FANUC

Thread: UPGRADE OF CNC SYSTEM TOSNUC TO FANUC

Results 1 to 2 of 2
  1. 03-25-2021, 12:45 PM #1
    vblraj279
    vblraj279 is offline Member
    Join Date
    Mar 2021
    Posts
    1

    Question UPGRADE OF CNC SYSTEM TOSNUC TO FANUC

    GOOD DAY FOLKS,

    JUST SOME CLARIFIACTIONS NEEDED.
    We want to UPGRADE TOSNU777 CONTROLS TO FANUC SYSYEM NEW VARIANTS.
    IS IT POSSIBLE ? BUT THE AXES DRIVES SERVO AMPLIFIERS, MOTORS AND SPINDLE DRIVES WE WANT TO KEEP TOSHIBA ONLY. SPINDLE DRIVE IS YASKAWA.
    CAN ANY EXPERT CAN GIVE FEED BACK ON THIS?
    Reply With Quote Reply With Quote
  2. 07-03-2021, 08:46 AM #2
    mluqman
    mluqman is offline Registered
    Join Date
    Nov 2008
    Posts
    37

    Re: UPGRADE OF CNC SYSTEM TOSNUC TO FANUC

    Hi, I have same issue, want to retrofit our toshiba bm 80e but the servodrive, motor want to keep. You start to upgrade or not?. Please share it. If you have schematic diagram of servodrive I think you could easyly to use other brand controller, I already searching the manual book of the servodrive but still not yet find. If you have, maybe you could share to me
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules