584,830 active members*
5,608 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > Fadal lubrication problem
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2021
    Posts
    2

    Fadal lubrication problem

    hi everyone
    my vmc40 lubricator(pdi bijur)
    under pressure when the machine is off or when emergency actived!
    What is the problem?

  2. #2
    Join Date
    Feb 2014
    Posts
    227

    Re: Fadal lubrication problem

    I am no expert but I did rebuild my FADAL VMC15 XT PDI system. I would have to say you have the solenoid maybe stuck open, just a guess. I am going to say electrically open spring loaded closed.

Similar Threads

  1. Fadal ball screw lubrication
    By MBX5 in forum Fadal
    Replies: 1
    Last Post: 12-10-2013, 06:06 PM
  2. TL2 x axis lubrication problem
    By garylb in forum Haas Lathes
    Replies: 6
    Last Post: 10-08-2012, 03:27 PM
  3. Bridgeport VMC 800 lubrication problem
    By dmold in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 11-16-2009, 04:05 AM
  4. Lubrication problem
    By Delw in forum Fadal
    Replies: 6
    Last Post: 09-14-2009, 01:04 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •