548,322 active members*
2,655 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Aug 2016
    Posts
    13

    Good design CNC router

    Hello all

    I want to eventually upgrade my home machinepark, that means cnc router, cnc lathe, and cnc mill. This thread is a search for a design to replace my current cnc router.

    What i have today is a machine made out of steel square tube, workspace about 3000mm x 1500mm i think its about 10ft by 4ft. The reason i want to upgrade it is because its not rigid enough, in short i cheaped out on the steel. If i remember correctly its made out of 50mm x 50mm x 3mm? (2"x2") looking to build using around 100x100x5-10mm(4"x4"), it also uses round supported linear rails wich aint that good.

    I have earlier come across builds that i like and looks to work great, however now that im looking to revisit them i cant seem to find them so it would be helpfull to me if you would want to drop links to builds that you like that are on the heftier side(doesnt need to be made of steel but it probably where im going).

    Been glancing at lowpriced commercial machines for clues but they weigh tons and thats to much.

  2. #2
    Registered
    Join Date
    Feb 2011
    Posts
    270

    Re: Good design CNC router

    I designed, and built a 4 axis Router table. Unfortunately, it (along with EVERYTHING else I owned) was lost in a fire. I have since rebuilt my shop, and replaced a few tools. Still need to replace a lot more, to be able to ever build another. I have been pricing the steel, and aluminum I used on the last construction and learned that material cost alone exceeds $11,000. It sounds from your description, that you are planning a similar machine. Sorry that I haven't been on here in awhile, but perhaps this will inspire others to chime in. Have a Blessed Day!
    -Mike

Similar Threads

  1. Replies: 4
    Last Post: 12-06-2019, 07:16 AM
  2. Looking for good CNC router design
    By pashab19 in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 11-29-2019, 08:39 PM
  3. My DIY CNC router design.. any good?
    By okimoki in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 04-24-2015, 06:12 AM
  4. Good cnc router
    By Lasersolution in forum RFQ (Request for Quote)
    Replies: 1
    Last Post: 05-22-2013, 05:04 PM
  5. Dual Plasma Router Table Design Concept Idea - Any Good?
    By NIC 77 in forum Plasma, EDM / Other similar machine Project Log
    Replies: 5
    Last Post: 06-11-2011, 04:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •