[eMTea]

Hi!

Does anyone have a step by step list of how to backup NC parameters of my controller?

What about PLC ladder?

[lshingleton]

Just like a program go to Parameter Screen and it says output so hook up a laptop and hit the output all soft key button and if you want the 9000s parameters you may want to open up PWE parameter first

[Al_The_Man]

Send me an email add by PM I have the procedure.

[tridnt]

what about an older controller 86 or 87?

[tridnt]

got to a shop and they are on the hope and pray strategy right now

[zavateandu]

Just like a program go to Parameter Screen and it says output so hook up a laptop and hit the output all soft key button and if you want the 9000s parameters you may want to open up PWE parameter first

If you want the 900s you have to hold EOB while hitting output,no PWE active need it while punching->right info
Go diagnose page and do the same output without holding EOB
you need to have 2 files on the end:cncparam.txt and dgnos.txt

[Al_The_Man]

0 serial for para and 900's back up procedure

[eMTea]

Thanks Al! Perfect! Wasn't able to open on the phone, but will try on my computer.