584,842 active members*
4,567 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2021
    Posts
    4

    Dynapath & AD GS23-2010 VFD

    Hello,

    I have a Tree 325 (Dynapath Delta 20M) with a VS-626MT III Spindle Drive Controller (Fried/Toast).

    I have a Automation Direct GS23-2010 that I have already hooked up / configured to work with the Yaskawa UAASKA-04CA1

    My next hurdle is to get the Dynapath Delta 20M to "talk" to the GS23 VFD. Looking through all the documentation I have on the Tree & the Dynapath I can not seem to find where to land the cw/ccw terminals & the speed control terminals from the VFD to the Dynapath.

    Has anyone done this before / know if this is even possible?

    I am able to get the Dynapath to start the VFD/motor via the 12CRE relay and the E-Stop to work vie the 1CRE relay

    Also would it be possible to get the motor encoder to talk directly to the Dynapath so it wont spit out the "Drive not up to speed error"

    The documentation I have on all components are in the google drive link below.

    https://drive.google.com/drive/folde...-V?usp=sharing

    Any help is greatly appreciated.

    Thanks

  2. #2
    Join Date
    Aug 2009
    Posts
    1567

    Re: Dynapath & AD GS23-2010 VFD

    ...there is an "Installation Manual" from Dynapath you need for Delta 20M Pinout's, Parameters, etc. The bad news is the manual cost $200+ from Dynapath.

    Click image for larger version. 

Name:	Dnyapath 10m 20m install.jpg 
Views:	0 
Size:	70.0 KB 
ID:	462392

Similar Threads

  1. 2010 Patriot VFD Inverter Manual
    By wormwood in forum Shopmaster/Shoptask
    Replies: 7
    Last Post: 11-27-2013, 10:34 AM
  2. AutoCAD & Inventor 2010 Shared Network Issue
    By RoboFutbol in forum Autodesk
    Replies: 1
    Last Post: 07-21-2010, 04:02 PM
  3. 2010 Patriot VFD
    By GunPilot in forum Shopmaster/Shoptask
    Replies: 19
    Last Post: 05-17-2010, 05:49 PM
  4. Mastercam & Solidworks 2010 file import
    By foxsquirrel in forum Mastercam
    Replies: 11
    Last Post: 04-04-2010, 09:07 PM
  5. Replies: 1
    Last Post: 12-01-2007, 02:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •