Greetings-
I have an RC-4. I homed the machine upon startup, when I attempted to do a tool height touch off, the bit was hammering into the top of the tool touch off pad.
My guess is dirty contacts on the pad. Has anybody experienced something like this before? Thanks in advance for any suggestions!
Results 1 to 5 of 5
Threaded View
-
03-30-2021, 05:01 PM #1
Registered
- Join Date
- Dec 2008
- Posts
- 2
Tool touchoff pad being "jack hammered" by bit when tool height button is pressed.
Reply With QuoteSimilar Threads
-
adding "slow tool change"-prefix for tool call
By spock in forum BobCad Post ProcessorsReplies: 1Last Post: 03-08-2021, 10:20 PM -
modify post to add "next tool" variable after every tool change
By allenp in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 2Last Post: 05-22-2016, 08:56 PM -
Looking for a tool- 1/32" Roundover Bit with Pilot or an equivalent.
By Tomlin in forum CNC ToolingReplies: 4Last Post: 08-07-2015, 05:19 AM -
Green "Tool Reset" prompt, but we have no button to push for that, or a tool changer.
By tomdbiggs in forum MilltronicsReplies: 8Last Post: 02-01-2010, 04:45 PM -
Tool height "touch off" tool unusable
By DHK in forum DeskCNC Controller BoardReplies: 6Last Post: 05-06-2006, 06:54 PM
Tags for this Thread
Posting Permissions
