[pswemmer]

Good day
I have a belt driven CNC 800mm x 800mm running Planet CNC TNG. It will cut fine for some time on a few items at a certain feed and speed

it will all of a sudden start shuddering on the next work piece, and mess up the work piece

It will cut fine for a few passes, say 5 and then shudders and mess up the piece, even with a 0.5mm cut on pine

Even by doing a squire or circle

Any advice will be appreciated

[Dean448]

Check that the stepper motors aren’t getting too hot.


Sent from my iPhone using Tapatalk

[pswemmer]

Will do thanks