584,800 active members*
4,218 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2018
    Posts
    8

    parameter edit screen lock

    how to do password protect for fanuc series Oi-TD parameter edit screen lock even though PWE in MDI mode from zero to one. At present soft limit for x axis and z axis in CNC centerless grinding is edited by shopfloor operators which is not a good practice.

  2. #2
    Join Date
    Aug 2018
    Posts
    44

    Re: parameter edit screen lock

    Hi,
    not so complicated
    Need to modify PMC control using key 2 fonction

  3. #3

    Re: parameter edit screen lock

    You set parameter 3299.0 (PKY) then PWE becomes protected. The only way to un protect it is to change 3299.0 back to a 0. This has to be set on the settings page where PWE is. You just page down till you find it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •