I am using BobCam to cut an inside grove in a steel 1/4 inch hole. My tool is a 1/4 in. shank and cutter with 3/16 shaft. The groove need be only .01 deep. The posted code starts the cutter -.0075 in X and 0 in Y. If BobCad cant stat the X and Y at zero it is a no go. I do not write G Code so correcting this is beyond me.
Thread: G code to cut inside groove
Results 1 to 4 of 4
Threaded View
-
04-03-2021, 06:37 PM #1
Registered
- Join Date
- Mar 2006
- Posts
- 51
G code to cut inside groove
Reply With QuoteSimilar Threads
-
macro code inside of a subroutine
By brockmo in forum FadalReplies: 7Last Post: 03-13-2009, 04:32 AM -
How do you cut square inside coners?
By Astroguy in forum Benchtop MachinesReplies: 41Last Post: 08-16-2007, 02:11 AM -
What kind of tools used to cut v groove pullys?
By QSCNC in forum MetalWork DiscussionReplies: 5Last Post: 12-23-2006, 03:24 PM -
Diameter of inside cut, too small
By SVM in forum Uncategorised CAM DiscussionReplies: 16Last Post: 06-19-2006, 03:17 PM -
Q: Best way to cut small oring groove?
By Deviant in forum MetalWork DiscussionReplies: 8Last Post: 06-23-2005, 07:38 PM
Tags for this Thread
Posting Permissions
