540,882 active members*
3,635 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > Colchester Tornado A90 alarm 1012 Turret not moved
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Nov 2020
    Posts
    1

    Colchester Tornado A90 alarm 1012 Turret not moved

    Hello,
    i have some trouble with an Colchester Tornado A90 (2001) with Fanuc 21i-T.
    I get a alarm 1012 Turret not moved / Wrong tool if i indexing the turret from the Programm, but the Turret moves and locks.
    I have bought this machine with drained servo battery, i have replaced the battary and referenced X and Z. Must the turret motor also be referenced? The Turret has only a Fanuc Servo and a "lock" sensor. No Encoder except the one on the servo.

    Can someone help me with that problem?

    Thanks
    Torsten

  2. #2
    Registered
    Join Date
    Aug 2008
    Posts
    6

    Re: Colchester Tornado A90 alarm 1012 Turret not moved

    Look at parameter 1815. If the APC bit for that axis is set to 1 but the APZ is at 0, then it needs to be referenced.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •