Hardinge GX1000 with Fanuc 0i control. Counter presets lost, causing toolchange 1006 alarm.
Does anyone have a copy of these presets?
They are found at SYSTEM, PMCPRM, COUNTER.
Also a machine set up procedure would be helpful.
Thread: Hardinge GX1000
Results 1 to 1 of 1
-
04-04-2021, 08:29 AM #1
Registered
- Join Date
- Jun 2010
- Posts
- 1
Hardinge GX1000
Reply With QuoteSimilar Threads
-
GX1000 spindle speed issues
By Crashmaster in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 09-15-2018, 12:04 AM -
GX1000 Spingle Lubrication
By graemeian in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 07-01-2018, 10:55 AM -
parameters 900 of lathe hardinge CS42(HARDINGE T42) with control fanuc 0T
By jparamo in forum Hardinge LathesReplies: 0Last Post: 10-08-2015, 07:32 PM -
Bridgeport GX1000 OSP is this the right forum?
By Edster in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 05-12-2014, 01:31 PM -
Bridgeport GX1000
By sunnybank in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 11-25-2009, 04:03 PM
Tags for this Thread
Posting Permissions
