My goal to use the CNC Machine to Plot & Position a Part Holder Jig on the table in exact correct position while stopping so that I can Weld/braze the Part to the Table, then re-starting on to the next plot & position. I need to Plot the XY-Position & Z-Rotation of the Part Holder Jig on the table in the exact position of the 3D Modeled Part. The Parts are positioned exactly in a 3D File Format, DXF, OBJ, 3DStudio, etc.. My enquiry your advisory on how to make the CAM Toolpath do this. I have failed to accomplish this simple task in CAM. position the tool "Part Holder Jig" at the center of the 3D Modeled part, turn the Tool in Z-Rotate to the same Degree as the 3D Modeled part & stop the machine so I can insert the actual 3d Modeled part & Braze it to the Table.