Hi, im am new to Artcam and cnc machining. Use Artcam 2011.
I draw a vector with several nodes, but need to move some of the nodes in the Z direction, but cannot find out how to move the nodes in other then XY direction.
Need it for the tool following the vector paths but in varying z levels.
Think it should be simple, but I just do not find out how to do it.
Results 1 to 2 of 2
Threaded View
-
04-06-2021, 04:59 AM #1
- Join Date
- Apr 2021
- Posts
- 9
How to move a node in Z direction?
Reply With QuoteSimilar Threads
-
slave will move in one direction with Y but not in other
By sksmdt in forum Mach Software (ArtSoft software)Replies: 0Last Post: 06-01-2018, 08:56 PM -
Move in a Plus direction X and Y
By Gallchobhair in forum BobCad-CamReplies: 25Last Post: 11-14-2013, 07:04 AM -
x axis will only move 1 direction
By brent48 in forum Stepper Motors / DrivesReplies: 1Last Post: 11-09-2010, 06:25 PM -
KM3P will not move in Y- direction
By BrianP in forum HURCOReplies: 5Last Post: 09-12-2010, 08:01 PM -
x axis will only move one direction
By CATCH22 in forum Mach MillReplies: 2Last Post: 12-17-2007, 03:53 AM
Tags for this Thread
Posting Permissions
