584,833 active members*
5,582 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Tool load monitor Mynx 2017 Fanuc 0i
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2006
    Posts
    222

    Tool load monitor Mynx 2017 Fanuc 0i

    Hi,

    Little problems with tool load monitor and explanation of symbols:

    I manage to record tool load to table.
    For example:

    Main Spindle:
    MAX L1 L2 AIR
    60 5 10 05,0

    Max is recorded value ?
    Is L1 warning limit and L2 breakage limit ? These are variations in percentage % or ??
    What is Air

    And for Z axis:
    G00 MAX L1 L2
    139 20 5 10

    In Y axis ther is only MAX and L2 value ?

    Thanks,

    -GB

  2. #2
    Join Date
    Sep 2006
    Posts
    222

    Re: Tool load monitor Mynx 2017 Fanuc 0i

    Found answer:
    max= recorded value
    L1= % for warning limit
    L2= % for break limit
    AIR= time in seconds how much tools not to take load. If exceeded tool broken.

  3. #3
    Join Date
    Jul 2005
    Posts
    380

    Re: Tool load monitor Mynx 2017 Fanuc 0i

    Correct.
    The big issue is that many folk have too little time in the "AIR" and so the machine craps out thinking the tool is broken.

Similar Threads

  1. Replies: 1
    Last Post: 07-16-2023, 02:57 PM
  2. U10M spindle load monitor and monitor mode
    By myhäje in forum Okuma
    Replies: 0
    Last Post: 02-21-2017, 08:45 AM
  3. Doosan Puma 240 Tool-Load Monitor
    By tubesteak in forum Daewoo/Doosan
    Replies: 0
    Last Post: 10-15-2016, 03:17 AM
  4. Doosan Tool-Load Monitor
    By vainooja in forum Daewoo/Doosan
    Replies: 1
    Last Post: 05-17-2016, 08:00 PM
  5. Series 18/18i / tool load monitor
    By 2500xly in forum Fanuc
    Replies: 0
    Last Post: 05-05-2011, 12:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •