Re: mach3
If you are running Mach3 on your machine, then you should use Mach2_3_ ... post processor as it generates G-code that suits Mach3 "slang"
On your CAM computer you generate the G-code using above mentioned PP and transfer the G-code file (.tap) to your CNC computer.
I think that Velox uses ordinary Mach3 so there should be nothing special. Mach3 does NOT use any post processor. It only generates MOTION according to the supplied G-code.
Make no mistake between my personality and my attitude.
My personality is who I am. My attitude depends on who you are.