584,826 active members*
5,018 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Okuma > Okuma MX 45VAE Floppy conversion to USB
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2021
    Posts
    38

    Okuma MX 45VAE Floppy conversion to USB

    I have a 1999 MX 45VAE with a 3.5 floppy drive wondering if anybody has a solution to convert over to USB without going to Okuma or distributer

  2. #2
    Join Date
    Mar 2009
    Posts
    1982

    Re: Okuma MX 45VAE Floppy conversion to USB

    I would recommend use RS232 instead. There are many USB or TCP/IP to RS232 converters available.

  3. #3
    Join Date
    Aug 2011
    Posts
    418

    Re: Okuma MX 45VAE Floppy conversion to USB

    You can use Gotek SFR1M44-U100K with correct jumper setting
    "Imagination is more important than knowledge."

Similar Threads

  1. Okuma floppy to usb conversion
    By Edster in forum Okuma
    Replies: 37
    Last Post: 07-26-2023, 12:29 PM
  2. USB Floppy Emulator on Okuma
    By kurmay in forum Okuma
    Replies: 3
    Last Post: 03-30-2022, 06:20 PM
  3. Okuma OSP7000L Floppy to USB?
    By fishtuna57 in forum Okuma
    Replies: 9
    Last Post: 07-11-2020, 04:07 PM
  4. 3.5" floppy to USB conversion?
    By Gundawg in forum Controller & Computer Solutions
    Replies: 3
    Last Post: 11-22-2013, 11:45 AM
  5. Floppy to USB Conversion Kit
    By Laser Motion in forum News Announcements
    Replies: 1
    Last Post: 01-23-2013, 04:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •