565,402 active members*
2,766 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Apr 2021
    Posts
    1

    Question Old dahlgren software

    Hello,
    I am looking for the software that can "convert (images) into the DAHLGREN .FT9 format" as is mentioned on page 13 of the Wizzard PC manual. I believe the software for doing this is called Grafix Pro, which i saw on https://www.ltdengraving.com/Software/default.html though it had no link or information on where to download the software. The software may be something else entirely, all I know is that the manual says it was "available from your dealer". If anyone has any information it would be greatly appreciated as putting images on our work could be very useful for our customers.

  2. #2
    Member
    Join Date
    Aug 2014
    Posts
    15

    Re: Old dahlgren software

    Had you contacted LTD Engraving? Long Ha is very knowledgeable about these machines and is more than helpful. He can be reached at Tel:510-531-3053 or long@ltdengraving.com

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •