Trying to drill holes .03 deep on a countered surface /solid with x9 it is for brail so i need to repeat the proses over and over on the same surface
Results 1 to 3 of 3
-
10-03-2022, 04:09 PM #1
Registered
- Join Date
- Sep 2005
- Posts
- 13
drilling a uniform depth on a 3d counter
-
10-04-2022, 07:44 AM #2
Flies Fast
- Join Date
- Dec 2008
- Posts
- 3108
Re: drilling a uniform depth on a 3d counter
Your drillpoints are placed on the part surface, select them, then set the drilling Depth to incremental Z-0.03
-
10-04-2022, 11:10 PM #3
Member
- Join Date
- Nov 2013
- Posts
- 4358
Re: drilling a uniform depth on a 3d counter
Hi,
not much help with the toolpath.....but I start talking Braile when drunk.....does that help?
Craig
Reply With QuoteSimilar Threads
-
O-1 Steel Drilling and counter bore question???
By fettersp in forum MetalWork DiscussionReplies: 4Last Post: 04-25-2020, 06:50 AM -
Need help - router drilling depth increasing
By vivid in forum DIY CNC Router Table MachinesReplies: 14Last Post: 05-04-2016, 09:51 PM -
Peck Drilling for 3 holes of depth 10mm on hardened material of 35 HRC
By mady_dawn in forum Community Club HouseReplies: 0Last Post: 12-26-2013, 08:00 PM -
Drilling depth
By orion_134 in forum MastercamReplies: 3Last Post: 11-12-2013, 07:58 AM -
Drilling depth is wrong detected
By Geo in forum UG NXReplies: 1Last Post: 02-03-2010, 10:10 AM
Tags for this Thread
Posting Permissions
