Hi Guys
My old PC died so i installed mach3 and my 2010 screen set on a new machine. Also bought a UC100 controller.
I have motion on the machine however when i press the home button nothing happens. I restored my mach3 xml file and my setting have imported successfully. Unsure what to try at this point. Looking for advice.
Results 1 to 1 of 1
-
06-19-2021, 11:38 PM #1
Registered
- Join Date
- Apr 2017
- Posts
- 77
Mach3 Restored 2010 screenset installed cannot home
Reply With QuoteSimilar Threads
-
Mach3 2010 screenset modification
By shopbuilt in forum Mach Software (ArtSoft software)Replies: 2Last Post: 05-04-2020, 09:18 PM -
Mach3, 2010 Screenset, Mach3, G540, UC100, Win 10 - Will not home
By SteveS in forum Mach Software (ArtSoft software)Replies: 2Last Post: 04-25-2019, 05:49 PM -
MACH3 "Home" speed very slow until STOP is pressed, then normal speed restored
By NickLumb in forum Mach MillReplies: 0Last Post: 11-24-2018, 07:16 PM -
Mach3 2010 screenset Metric Post Processor
By goranmax in forum Mach Software (ArtSoft software)Replies: 19Last Post: 03-28-2017, 06:16 PM -
Econo-Probe Setup with Mach3 + Ger's 2010 Screenset
By jmc2010 in forum CNC Machine Related ElectronicsReplies: 3Last Post: 06-24-2014, 04:21 AM
Tags for this Thread
Posting Permissions
