584,850 active members*
4,187 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Arduino > GRBL Uno Breakout Board / Shield Board
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2017
    Posts
    7

    GRBL Uno Breakout Board / Shield Board

    If you are thinking about using the GRBL Breakout Board/Shield CNC Design Ltd you might be uncomfortable wiring it up without having a clear idea of what is on the board. Especially as it doesn't come with anything more that a hookup diagram. For those reasons you might find the attached schematic helpful.

    If you any errors please post to let me know- thanks.

  2. #2
    Join Date
    Mar 2021
    Posts
    35

    Re: GRBL Uno Breakout Board / Shield Board

    Very good

    Thanks




    I have a break-out board that came with the equipment.It failed and I replaced it with Arduino Uno/v3 sheild. But I control the spindle motor outside the board and just on/off type of control. No speed control


    How do I control the DC motor of the spindle?

    Do I need a dc driver or a simple transistor circut will do?

    Thanks

  3. #3
    Join Date
    Jul 2017
    Posts
    7

    Re: GRBL Uno Breakout Board / Shield Board

    This is crude but effective. It's virtues are isolation and simplicity.


Similar Threads

  1. motion control board (breakout board ) which one to buy??
    By rmachinist in forum Benchtop Machines
    Replies: 33
    Last Post: 12-23-2019, 03:45 PM
  2. CNC TB6550 Board Arduino UNO Board Estlcam
    By genesiospinola in forum Stepper Motors / Drives
    Replies: 88
    Last Post: 10-16-2019, 07:21 PM
  3. Flashing GRBL To Uno board + unsmooth jog
    By spandadk in forum Arduino
    Replies: 8
    Last Post: 02-14-2018, 02:44 AM
  4. New GRBL Breakout Board/Shield
    By CLaNZeR in forum News Announcements
    Replies: 0
    Last Post: 08-08-2017, 10:36 AM
  5. Replies: 3
    Last Post: 06-03-2016, 02:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •