This week I'll have a Mycenter 0 delivered, and I will have to convert it to single-phase power. I don't think it will be a difficult job, however I won't know until the machine arrives.
It has the 16-tool changer, and the 8000RPM spindle option. It has the YASNAC MX-3 control, and has been recently serviced. It does not have a hydraulic unit. It is currently wired for 208V 3-phase power.
Anyone here been down this road before?
Results 1 to 2 of 2
Threaded View
-
05-02-2021, 03:52 AM #1
Registered
- Join Date
- Mar 2006
- Posts
- 42
Kitamura Mycenter 0 Conversion to single-phase
Reply With QuoteSimilar Threads
-
Hurco KMB1 3 Phase to Single Phase Conversion
By bmv234 in forum HURCOReplies: 1Last Post: 04-18-2020, 04:35 AM -
MultiCam Pro 3phase conversion to single phase
By Max in forum Commercial CNC Wood RoutersReplies: 8Last Post: 03-30-2010, 06:34 PM -
Spindle speed low after 3phase to single phase conversion
By dakotalarry in forum FadalReplies: 17Last Post: 05-26-2009, 07:51 PM -
Kitamura Mycenter 1 480 volt to 240 volt conversion?
By mjrockwellus in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 10-21-2008, 05:14 PM -
110 single phase to 220 single phase.
By Nono in forum CNC Machine Related ElectronicsReplies: 36Last Post: 06-06-2005, 01:51 AM
Tags for this Thread
Posting Permissions
