Good morning everyone, I have a problem, I have a Daewoo Doosan 2100 with a Fanuc 0i-f and that has a rotative table on axis Z and then the z and x, I'm able to have a proper gcode in Madcam but not in Rhinocam, in Madcam there is the option to tell to postprocessor which is the axe 1, 2, 3 and was easy for me to invert Z and X plus put 2 as multiplier on X because the Fanuc need the Diameters. the only close result i had is to setupo a 4 axis machine then I cancelled the Y in the post processor, but in this way I obtain a gcode that is Z and C and some X but I need X and C and some Z. Is there a way to to tel to postprocessor to call Z as X and X as Z? I'm using a radial tool in my Doosan so basically it is parallel to X axe, while on all the preset machines on rhinocam the axe is parallel to Z. I think there are 2 options available... invert the Z and X axes on postprocessor or find a way to have a tool parallel to X and rotary table on Z. I hope someone can help me...