[Kinkajoo]

G'Day all,
i really hope that some of the gurus here can shed some light on what this error is and how to fix it!
I just set up a new machine.
Queen ant pro, DDCS 4.1 with 4th axis.
everything seems to be working fine.
Did several test cuts all perfect, flattened the spoil board ready to go.
Load new file press start and get this:

HOME operation not performed:L5[G0G53Z#1402] and the reset light comes on.

Any one have any ideas?
Ive already turned the machine off and on again!
Thanks in advance.

[steryd]

Can U show g-code. Looks like in line no 5 is some error.

[Kinkajoo]

The file im trying to cut looks like this. Thanks for having a look.

T1M6
G17
G0Z5.010
G0X0.000Y0.000S17500M3
G0X-10.556Y47.026Z5.000
G1Z0.000F1000.0
G1Y55.026Z-2.000
G1Y47.026Z-4.000
G1Y71.151F1900.0
X-10.841Y71.353
X-11.445Y71.686
X-12.075Y71.944
X-12.718Y72.126
X-13.360Y72.234
X-13.990Y72.271
X-14.598Y72.245
X-15.477Y72.161
X-15.556Y72.152
Y46.264
X-16.115Y46.179
X-16.117Y46.179
X-18.106Y45.878
X-18.159Y45.870
X-19.908Y45.621
X-20.556Y45.523
Y71.758
G0Z5.000
G0X-0.556Y125.632
G1Z0.000F1000.0
G1Y133.632Z-2.000
G1Y125.632Z-4.000
G1Y157.811F1900.0
X-0.650Y158.043
X-0.832Y158.456
X-0.871Y158.534
X-1.023Y158.823
X-1.211Y159.318
X-1.269Y159.454
X-1.503Y159.935
X-1.778Y160.393
X-2.094Y160.914
X-2.465Y161.404
X-2.884Y161.854
X-3.347Y162.258
X-3.844Y162.610
X-3.910Y162.652
X-4.142Y162.792
X-4.518Y163.067
X-4.915Y163.312
X-5.023Y163.373
X-5.411Y163.574
X-5.556Y163.636
Y110.384
X-5.790Y110.000
X-5.954Y109.633
X-6.277Y108.975
X-6.418Y108.468
X-6.598Y107.922
X-6.831Y107.395
X-6.913Y107.230
X-7.220Y106.689
X-7.593Y106.165
X-7.878Y105.555
X-8.155Y105.079
X-8.368Y104.708
X-8.582Y104.182
X-8.790Y103.625
X-8.838Y103.512
X-9.025Y103.119
X-9.239Y102.741
X-9.301Y102.639
X-9.557Y102.257
X-9.863Y101.869
X-10.311Y101.204
X-10.555Y100.590
X-10.556Y100.588
Y164.535
X-15.556Y164.539
Y92.381
X-15.558Y92.379
X-16.194Y91.434
X-16.844Y90.461
X-17.081Y90.130
X-17.253Y89.906
X-17.527Y89.469
X-17.741Y89.151
X-17.888Y88.946
X-18.147Y88.611
X-18.296Y88.432
X-18.384Y88.329
X-18.835Y87.811
X-18.940Y87.680
X-18.994Y87.612
X-19.880Y86.538
X-20.089Y86.178
X-20.322Y85.834
X-20.355Y85.789
X-20.556Y85.530
Y164.542
X-20.875Y164.543
X-21.520Y164.508
X-22.160Y164.404
X-22.783Y164.233
X-25.556Y164.180
Y44.785
X-25.698Y44.765
X-27.675Y44.466
X-29.624Y44.163
X-30.556Y44.018
Y164.084
X-31.603Y164.064
X-35.556Y164.116
Y43.278
X-35.752Y43.250
X-37.329Y43.004
X-38.694Y42.789
X-38.781Y42.776
X-40.556Y42.523
Y163.989
X-44.014Y163.883
X-44.429Y163.856
X-44.841Y163.800
X-45.556Y163.678
Y41.774

[joeavaerage]

Hi,
what does the DDCS manufacturer say?

Craig

[ProxSmart]

Did you resolve it now?

[Bakhtin]

In the parameters menu, disable the function of raising the Z axis to a safe height before starting the program

[Bakhtin]

L5[G0G53Z#1402] Before starting the program execution, it is prescribed to raise the Z axis to a height of 1402 mm and only then begin executing the program codes.