hello all
do somebody have a System Variables list for acramatic A2100
thanks
Karl
hello all
do somebody have a System Variables list for acramatic A2100
thanks
Karl
Variables for the A2100 are dependent on several items such as the machine manufacturer (i.e. Cincinnati, Tree, Mighty, etc.), type (VMC, HMC, TC) and Model (Arrow, Sabre, Lancer, Hawk, Avenger). It was also used as a retrofit control on many different types of machines which each had custom MAI's written for them. There were too many variations to just randomly guess as to what you are looking for.
cincinnati arrow 750 1997 year
I also forgot to mention software version affects it too. I have a list from a 97 Arrow which is likely very close to what you are looking for, but it is hundreds of pages of raw data that does not seem like it would help you. What specifically are you looking for/trying to do?
hi Maver1ck
can you maybe send me the list?
thanks Karl
Jarl85, I agree with maver1ck; if we do not understand what you are attempting to do we cannot help you. The permutations of trying to guess what you need are futile.
ok
I'm looking to activate air solenoid for the spindle,
thanks, Karl
I have only seen a limited number of these machines with an Air Blast through the spindle (tied into the through spindle coolant system).
Is this what you're asking about? or are you referring to the solenoid for the drawbar cylinder? or are you trying to add an aftermarket air purge to the spindle?
hi
yes I'm talking about Air Blast through the spindle
thanks Karl
These machines do not have many air valves, you should be able to physically find it and activate it manually.